PC-based scope SW
(courtesy of Ronen)
http://www.zeitnitz.eu/scope_en
Photo-report
This report is about how the scope worked for me when it was tried with wind-speed and wind direction sensors powered from Raspberry Pi’s 3V pins.
- Constellation:
– One cable built from two:
__ * Gold Plated banana plug to Small Test Hook Clip Cable. Test Probes IC PCB.
__ * 3.5mm AUX AUXILIARY CORD Male to Male Stereo Audio Cable for PC
– One PC microphone in
– Scope SW
- Signal from wind-speed sensor
- Signal from wind direction sensor (direction change may be noticed in the middle of the signal – amplitude change)
Pingback: Raspberry Pi experiment 17: RF 433Mhz with SMAKN Tx/Rx Kit | My Hobby of 'Making'