GETTING STARTED:
- Getting started with Dynamic DNS (DDNS)
- Getting started with Yocto. Package management (update/install)
GETTING STARTED (Raspberry Pi):
- Getting started with Raspberry PI board
- Getting started with Raspberry Pi camera module
- Getting started with Wi-Fi
- Getting started with Cellular modem
- Getting started with UART/Serial Port
- Getting started with I2C
- Getting started with power/batteries
- Getting started with GPIO
- Getting Started with IR receiver using lirc-rpi overlay
- Getting started with 433mhz with ASK Transmitter Receiver kit
- Mounting Samba network drive on raspberry Pi
GETTING STARTED (Arduino):
GETTING STARTED (Intel Galilleo):
GETTING STARTED (Intel Edison):
- Getting started with Intel Edison. The very first steps
- Getting wtarted with Simple HHTP server with IoT XDK
- Getting started with Edison USB-host
- Getting started with Edison: Static IP Address
Useful Tools
EXPERIMENTS
Streaming
01 [RPi] PiCam Video Streaming via WiFi
02 [RPi] PiCam video streaming through cellular network 3G/GSM
03 [RPi] Streaming using HTTP
03 [RPi] Streaming to Web
04 [RPi] Adative HTTP Streaming
04 [RPi] Streaming using VLC. HTML5 containing images
05 [RPi] PiNoir camera and IR leds
06 [RPi] [Prototype] Casing of RPi IR Wifi camera
06 [Prototype] RPi: Stationary Recording/Playback Training Assistance System
Communication and GPS location
07 [RPi] RS-232
08 [RPi] RS-485. Experiment failed: missing components.
09 [RPi] GPS module: “plug and play”
10 [RPi] Going standalone: RPi + GPS module + WiFi dongle + battery
11 [RPi] RS485 USB-dongle
Solar power
12 [RPi] Autonomous Solar Auto-Reporting RPi
12 [RPi] More batteries added
12 [RPi] More Solar Power + A2D Converter for Battery Voltage Reports
Experiment #13: published at HACKADAY by Rud Merriam (Rud’s LinkedIn profile)
13 [RPi] [Prototype] Wind Speed and Direction Meter (Anemometer)
13 [RPi] Dealing with power again
13 [RPi] Few more experiments with batteries
13 [RPi] Less power consumed and more produced and preserved
13 [RPi] Temperature Sensor
13 [RPi] [Prototype] Anemometer based on sensors F200-201/2
13 [RPi] [Prototype] Anemometer based on sensors F200-201/2 v2
14 Trying PC scope SW by probing through audio-device microphone input
15 ODROID, PCDuino, Raspberry PI Reset and more
16 [RPi] Power from wind: no successes so far
16 [RPi] Power from wind: oiling and blades expansion. Dynamo is finally destroyed by the wind.
17 [RPi] RF: 433mhz with SMAKN ASK Transmitter Receiver kit
18 [Arduino] [Prototype] Self-switching corridor lamp (motion detector, relay). Published at HACKADAY by James Hobson (Jame’s page and projects)
19 [Intel Galilleo] LAN TCP communication with RaspberryPi using Python
20 [Intel Edison] Intel Edison: Simple HHTP server with IoT XDK
21 [Intel Edison] Investigating IoTivity
22 [Intel HW] Moving cars